|
|
Post by addasih on Dec 31, 2016 16:39:55 GMT 1
To discuss anything related to the program
|
|
|
|
Post by Jkkw on Jan 11, 2017 10:20:52 GMT 1
|
|
|
|
Post by pa380scal on Jan 17, 2017 15:01:14 GMT 1
|
|
|
|
Post by a380admirer on Feb 7, 2017 12:32:20 GMT 1
|
|
|
|
Post by marlibu on Feb 9, 2017 19:19:07 GMT 1
hi guys, I've always wondered how the lifting brackets attached to the various sections of the airframe, is actually affixed to the frame. Can anyone help educate me? i keep think each bracket is affixed using some form of suction, so there are no holes or penetrations into the finish.
|
|
|
|
Post by pa380scal on Feb 14, 2017 15:37:05 GMT 1
|
|
SAS380
in Convoy en route to Toulouse
Posts: 92
|
Post by SAS380 on Feb 23, 2017 18:47:52 GMT 1
Hi Guys,
Has anyone of you seen any drawings over the factory buildings where the A350 is built.
The different bays of manufacturing and painting and so on.
The reason why i'm asking is that it is simplier
to follow the manufactoring if I can look at a
picture of the environment of the factory.
Regards,
SAS380
|
|
|
|
Post by addasih on Feb 23, 2017 20:00:15 GMT 1
Hi Guys, Has anyone of you seen any drawings over the factory buildings where the A350 is built. The different bays of manufacturing and painting and so on. The reason why i'm asking is that it is simplier to follow the manufactoring if I can look at a picture of the environment of the factory. Regards, SAS380 Maybe you can start with this thread which is a reference thread a380.boards.net/post/47550/thread |
|
SAS380
in Convoy en route to Toulouse
Posts: 92
|
Post by SAS380 on Feb 24, 2017 7:58:17 GMT 1
Thanks addasih.
SAS380
|
|
kronus
in service - 1 year
Posts: 3,400 
|
Post by kronus on Feb 28, 2017 13:58:42 GMT 1
|
|
